Thingmagic Mercury xPRESS Platform v1.7 Manual de usuario Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 144
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
WiFi Module
A DIVISION OF TRIMBLE
54 Using the Optional Modules
confINCLUDE_CLI_CMD_WIFLY_FACTORY_RESET
This is used to include the Console command for RN-171 factory reset
The CLI commands syntax: wifly-factory-reset
confINCLUDE_CLI_CMD_WIFLY_FIRMWARE_UPDATE
This is used to include the Console command to update firmware in the RN-171
The CLI commands syntax: wifly-firmware-update <filename>
<filename> type is .mif or .img
Configuration Settings
To use RN-171 with xPRESS Reader, enable configuration for output mechanism in
conf_xpress_reader.h as ENABLE_OUTPUT_WIFLY
The WiFi module (RN-171) requires the following configuration settings to support all its
modes of operation.
WiFi Config
SSID
Auth type
Password
DHCP/Static IP Config
DHCP Mode ON/OFF
Port Number
IP Address
Netmask
Gateway
DNS Address
Remote/Host Config
Hostname / DNS name
Host IP Address
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 143 144

Comentarios a estos manuales

Sin comentarios