search

Thingmagic Autonomous Configuration Tool Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Configure
Autonomous Configuration Tool v1.0 User Guide 15
Configure
After a successful Connect to a reader the Configure tab, as shown in Figure 3, provides
all the available autonomous reading settings. In addition you can install firmware,
configure the Read
display options and check the current firmware version of the
connected reader.
Figure 3: Configure Tab
WARNING!
Once Apply is clicked all selected settings will be saved to the connected reader.
This may cause the reader to start reading at 100% duty cycle.
Read & Write Settings
This sections allows the basic behavior of a autonomous reading to be defined.
The following configuration settings can be defined for autonomous operation:
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comentarios a estos manuales

Sin comentarios
  • Hives & Honey Teletronics Swisscom Ruud Belshaw Brothers
  • Doro Teléfonos móviles Juiceman Batidoras Asus Equipo de música complementario Chicago Electric Adaptadores E Inversores De Energía Wahl Recortadoras Bikini
  • Buchi Mixer B-400 Smeg S7212LS2P1 Brand 37500 Electrolux EOB53003X Philips AZ1837/12
  • Philips 234E5QDAB/00 Manual de usuario Pioneer S-71W Manual de usuario Echo SRM-2400SB Manual de usuario HP Compaq dc5800 Guía de usuario BLANCO 157-090 Manual de usuario